BASIC Commander  (4)
Peripheral Modules  (20)
Kits  (7)
Accessories  (5)
Arminno  (1)
Ozone  (1)
MR 2x5 Dual DC Motor Controller Module
Detailed profile

Product Overview:

Innovati’s MR 2x5 Module can reach the goal of freely controlling two DC motors simultaneously through simple commands. It allows the user to change the rotation speed of the motor any time and acquire the current status of the motor, including the rotation and the direction. The user can also obtain the value of the electric current through the commands.

Applications:
※ Control the driving of the motor so as to configure the forward or backward movement of the model vehicle. With the speed difference setting, the turning of the vehicle’s moving direction can be performed.
※ It allows the user to control the motors for different rotation directions so as to control the forward/backward and left/right movements, such as those in the control of robotic arms.
※ It can be connected with a small fan for controlling the wind strength.
※ It can monitor the electric current of the motor and allow the user to configure over-current protection to stop motor operation.

Product Features:
※ It allows the user to configure the execution of commands on two motors at the same time.
※ It can provide a continuous current within the range of ±5A.(Peak current up to ±7.8A)
※ The maximum allowable input voltage for normal operation can be up to 28 V.(Up to 40V for the efficiency reduction condition)
※ The maximum internal PWM current control frequency can be up to 8k Hz.
※ Provides automatic shut down protection against overheat (~175°C).
※ Provides protection against current overload.
※ With the brake command, it can rapidly stop the motion of the motor.
※ Provides up to 256 levels of rotation speed settings.
※ Through the commands, it allows two motors to operate at different speeds in different directions at the same time.
※ By using the commands, it is easy to obtain the current status of the rotation speed or direction of the motors.
※ Provides commands for reading the value of the electric current and allows the user to configure the mechanism for stopping the motor under over-current conditions.

For detailed specifications, please refer to “MR 2x5 Dual DC Motor Controller Module

Innovati, inc.
Copyright © 2007 - 2011